Username Post: Make your own Bling swirls
Bxr-Linda
Mayor
Posts: 14601
Joined: 05-12-03
Bxr-Linda

    In response to Booknook200

  • Booknook200 Said:
Might have to try that. I recently bought a jeweled swirly thing for a layout, pulled it off, to put on the layout and it did not go on in the same swirly shape it was supposed to have been. It was very difficult and unruly to use.




Another trick is to use painter's tape (masking tape) or drywall mesh.
Carefully press the tape to the top of the design.
Peel off the backing to expose the adhesive. Press the whole piece to your project (careful not to stick down the tape or mesh).
Peel off the masking tape or mesh.



Clear as mud??
It's much easier to illustrate than explain in writing.


 
NOTE: You are viewing an individual post. View the Entire Topic