this is NOT mine...it was NOT my idea. these are the instuctions i copied from someone else on another scrap site. just want to make sure to give credit to someone else...eventhough i dont know who it is! lol
Start with 2 wire cubes - mine are silver and came from Big Lots. Picture two is the side view. Picture 2 is a close up of the side view. I placed the front rack face down on the table and placed a spool in each corner moved in one space from the edge. I used zip ties - ran it through the center of the spool, around the rack and the X where the wires come together and back through the center of the spool. Then placed the second rack on top and secured the zip tie around the wire. I repeated this on each corner. Then I placed another spool in the corner - ran a zip tie through the center, around the wire rack, and then through one of the other openings in the spool and pulled it tight. After making sure all the sip ties were tight, I flipped it over and tied red bows on each corner. Then I tied one longer red ribbon at one corner, hammered a nail into the wall (make sure it's in a stud, the paint is very heavy) and hung the rack up. I love how it works and I tend to use my paints more now that I can see them.