American Crafts - DIY Shop 3 Collection - Mini Stapler - Gold

Yes...uses the same mini staples as for Tim Holtz Tiny Attacher. Reach in is only about 2 inches. By: rjbiss66 (31-Jan-16) Helpful Answer?  Yes  |  No Thank you! Report Inappropriate This Answer has been reported. Thank you!

Hard to explain but there's a spring inside the stapler held together by a long thin metal 'rod' I guess you can call it. That rod is hooked into a hole towards the end of the stapler (where you hold the stapler) unhook that metal rod & it pulls out--then tilt the stapler & you'll see the staples just fall out (mine came with the staples inside so yours should have some as well) add any new staples then slide the metal rod with the spring right back in--don't worry about pushing it in--you'll feel a slight resistance...this is what keeps the staples in place...then hook it right back into that little hole found towards the end of the stapler. I hope this helps in some way! By: Kay.Lori (28-Nov-16) Helpful Answer?  Yes  |  No Thank you! Report Inappropriate This Answer has been reported. Thank you!

Thanks! Got it! By: suzeqo (01-Dec-16) Helpful Answer?  Yes  |  No Thank you! Report Inappropriate This Answer has been reported. Thank you!