I wanted to love this trimmer, it's rotary with an assortment of decorative blade cartridges that store handily underneath, and the bed size is a card maker's dream--8 inches without any gaps and extension arms that provide measurements up to 14 inches! However, the trimmer I received is off somewhere between 1/8th to 1/16th of an inch--wouldn't have been a total deal breaker IF the trimmer had 1/16th inch markings, but it does not, so you're left guessing. What else is lacking upon inspection? The vertical cutting bed guide lines are only spaced 1 inch apart, I need at least 1/4 inch guidelines, and there are no consistently spaced horizontal guidelines, only guidelines for specific paper sizes. There are no measurement markings past the cutting blade. It is difficult to line up your cutting edge with the blade because the arm that the blade runs along does not butt up to the actual cutting line. I would like to add that Scrapbook.com's Customer Service is excellent. They completely understood and resolved my defective trimmer dilemma with excellence.
You must be logged in to comment. Please click here to log in.