Shop New & Bestselling Card Making!
Take an Extra 10% OFF With Code: SPRING
Take an Extra 10% OFF With Code: SPRING
$18.00 $11.29
$30.00 $15.99
This is no magic trick - but the results are so magical that you simply won't believe your eyes! The Magic Mat Cutting Pad from Scrapbook.com is going to change the way die cut on all your projects.
The Short Magic Mat was designed to be used with the Cuttlebug die cutting machine in place of a B plate. Two Short Magic Mats may also be used to replace both B plates in your Cuttlebug die cutting sandwich.
The Short Magic Mat is also compatible with the following machines, however, the length and width of the Short Magic Mat will likely be smaller or narrower than the platform or plate for these machines:
The Short Magic Mat is not recommended for use in machines that are not on the list above.
*Review product images for die cutting sandwiches using the Magic Mat with this machine. For more sandwich configurations and user tips, be sure to check out our Top Magic Mat Questions Answered video!
Contents: 2 short Scrapbook.com Magic Mat Cutting Pads
Size: Each cutting Pad measures 6" x 7.75" with a thickness of 3mm
What Is The Magic Mat?
Features:
Say goodbye to the typical cracking and etching you're used to in standard plastic cutting pads. With the Magic Mat, you won't have to worry about deep plastic cutting pad impressions getting transferred to your new project. And these are just a few of the many fabulous tricks up the Magic Mat's sleeves!
Tips For Using Your Scrapbook.com Magic Mat:
At Scrapbook.com, we prioritize your satisfaction. We genuinely care about your experience and strive to go above and beyond to ensure your happiness. From order to delivery, we pay attention to every detail for exceptional experiences and perfect condition upon delivery.
This is a Scrapbook.com exclusive product
Number of pieces: 2
Please note The Magic Mat is not magnetic.
This mat is amazing. Actually, it’s better than amazing but I can’t find another adjective at the moment. My thinnest dies (Lawn Fawn box cards) do not come out with any signs of warping. And it’s so smooth going through my Vagabond. And it’s fantastic with one of my finely detailed die that I’ve tested.
I LOVE it when a new-to-market product exceeds my dreams. IF YOU ARE A DIE CUT MANIAC YOU MUST GET THIS!!
This review was written about a related product.
I thought I would give this try on my cuttlebug, Since the B plates are hard to come by now a days. This mat does cut well. But for the thin dies you want to cut. It seem to not have enough thickness unless you have couple piecs of paper or cardstock under the plate or mat to give it a little bit of more thickness to cut it.
This review was written about a related product.
Love the product. Works great in the Cuttlebug. Buying more for friends for gifts, since it's hard to get the acrylic plates. Besides, it's so nice to not have to use the acrylic plates that warp. Leave it to Scrapbook.com to come up with a solution to a problem! I'd highly recommend the plates and shopping at Scrapbook.com. A great place to buy your crafting needs! You might also want to consider making Cards for Kindness!
I am enjoying the magic mat. It's just not thick enough. In my Cuttlebug sandwich I am using the magic mat along with one of my plastic mats and a rubber mat and I'm not getting enough pressure, so I am also using a piece of thick paper to shim it and it cuts fine then. It's much better than those plastic plates.
This review was written about a related product.
Purchased last week. Spent 1 whole day "playing"! Used standard size Magic Mat with my Gemini Jr. Excellent results! I appreciated your video on the various "sandwiches" for die cutting machines. Very useful. A good rugged mat. I did as you suggested, regular bottom cutting plate, magic mat, material w/die cutting side down, 2nd cutting plate, & 1 piece of 100# CS. Trying to flip mats regularly. So far, all is good.
This review was written about a related product.
This is an amazing product. It will end the problem of the lower cutting matting ruining your paper with old cuts I've used mine everyday since I bought it. It's fantastic. It doesn't warp, doesn't show cuts and doesn't need shimming as often as using the plastic cutting pad. I highly recommend this product.
This review was written about a related product.
My prefer die-cutting machine is a Spellbinder's Platinum 6. It's about 4 years old and I use it daily. After a few tests with word dies and intricate Spellbinder's dies I fell in love. I do have a cardstock shim under the Magic Mat. It's just like anything else, it takes trial and error to get the kinks worked out. But man do I love not having any fuzzy pieces on my die cuts anymore. That's amazing! And the mat doesn't warp or buckle.
This review was written about a related product.
I’ve had my mats (bought 2 different sizes) for about a week. I LOVE THEM. I have a Big Shot and it fits perfectly for all the sizes if wafer thin dies I’ve used. Cuts like butter, and is so smooth and quiet. 💗
To prevent overuse of sections, I marked the edges so I remember to flip and turn it each use.
This review was written about a related product.
The only negative about this product is that it is entirely too long for the Big Shot Switch machine and I had to cut it down, but that's alright because now I have two mats!
This thing really is what it's name implies.. it's magic! It delivers crisp clean cuts and when it gets all misshapen from repeated runs through whatever machine you're using just run your heat tool over it for a few minutes and voila, good as new!
This review was written about a related product.
Works great. I have Bira 9 inch opening die cutter/embossing machine. The majic mat is about 1.5 inches longer then my thick platform so I overhang it on the insert end and make the back end all line up. Platform, a magnetic cutting mat, paper, die and magic mat on top. Sometimes I use the 2 magic mats one on the thick platform, die, paper, and another magic mat. My original bira cutting mat is worn out so the magic mat replaces it. Really like magic mats.
This review was written about a related product.
You must be signed in to comment. Please click here to sign in.
Does anyone know how this compares to the I-Crafter cutting mat? It was supposed to be the Next Big Thing. And it does work but it is now warping badly and heat doesn't flatten it out. I really want to try this mat but am leery. I use the regular Gemini with a set of Junior plates so size should not be an issue.
By:
suethornton
(17-Jun-21)
We do not sell the I-Crafter cutting mat so unfortunately, we are not familiar. However, the Magic Mat works great with the Gemini. In the event that it does warp you can warm it with a heat gun, the warm sun or warm water to flatten out again.
By: Scrapbook.com
(21-Jun-21)
Can the Magic Mat be used in the Spellbinder Grand Caliber?
By:
Ltakaiwix
(25-Mar-21)
Hello, I just bought again and these two mats bought as pair do not fit my Cuttle bug because 6'' is too wide/big yet the first one I purchased last year, fits my Cuttle bug perfectly because its 5.75'', what happened?
By: Pepperspike
(09-Mar-24)
Hello. The width of this Magic Mat is 6 x 7.75. If that width will fit inside your Spellbinder machine that it will work.
By: Scrapbook.com
(29-Apr-21)
Can the magic mats be used with the Stampin Up cut and embosser machine?
By:
smaf25
(12-Jun-24)
Hello! Checking on our end, we can confirm this Magic Mat should fit in the Stampin' Cut and Embossing machine, which has a 6" wide opening.
By: Scrapbook.com
(13-Jun-24)
I have the Sizzix big shot switch will these mats fit and work with my machine?
By:
emmons02
(24-Jul-23)
I have two questions: 1. The Cuttlebug isn't listed as a recommended machine for these mats. However, it is mentioned that the size of the mats fit the Cuttlebug. So, are they recommended? 2. I watched the video for the Magnetic Magic Mat and the demonstrator mentioned they are not recommended for embossing folders, but the non-magnetic mats are. What would the sandwich be for the Cuttlebug and the original Gemini?
By:
diannaj55
(27-Dec-24)
Hello, thank you for contacting us and bringing this to our attention. We have asked the team to update the list in the full description to include the cuttlebug since these are compatible with the machine. The Magnetic Magic Mat can not be used with embossing folders because this risks the mat's integrity. The magnetic magic mat is a bit stiffer than the original, and because of the magnetic plate, we have found it incompatible with embossing folders. The Short Magic Mat was designed to be used with the Cuttlebug die-cutting machine in place of a B plate. Two Short Magic Mats may also be used to replace both B plates in your Cuttlebug die-cutting sandwich. The sandwich for the Gemini would be (top to bottom) A cutting plate, thin metal die, paper, magic mat, and cutting plate.
By: Scrapbook.com
(31-Dec-24)
I bought a magic mat and I can heat it up to reduce the warp. However, the tiny cuts on the service don�t go away and they leave marks on the surface of the die cuts. Is there a way to fix this? Thank you
By:
User
(20-Nov-24)
Hello! The Original Magic Mat works by allowing the edges of your dies to penetrate the compacted fibers and allows for a clean cut on your paper as it rolls through your die cutting machine. Due to the self-healing composition of the Magic Mat, paper scraps and threads can find themselves wedged inside the mat. Don't worry - that's completely normal!
Will Magic short fit in my Kokomo�s portable die cutting and embossing machine?
By:
Grama7x
(29-Jun-24)
Hello! These mats should work in any die cutting machine with an opening that is 6" wide.
By: Scrapbook.com
(01-Jul-24)
