Take an Extra 12% OFF With Code: CELEBRATE

Store Inspiration Watch SBC Fest

Creative Kindness More

Forum > Papercrafting > Topic

how to put a flower,etc in the middle

Topic Closed

Oct '09 Drpayne

RE: The Lady At Home: I usually use an x-acto. But as for paper piercers/eyelet setters, my friend gave me a great one from ProvoCraft. No hammers or springies or any thing. And I even used it to pierce cardstock the other day. She bought it on ebay for around $10. Silent Setter by ProvoCraft. Check it out.

I use Xacto knife
Sep '09 Wiser1

RE: Scrapnread: I would have to say the Big Bite is perfect for so many reasons. My dh bought mine at M's with a 50% off coupon. I love it. So easy to use, measurements clearly marked, lots of reach etc.big

I must say I love my bigbite. Prior to having that I used my making memories tool kit. The bigbite is sooooo much easier than tapping a hammer on the punch to make the hole.

I too bought mine iwth a 50% off coupon....what a deal!
Sep '09 Scrapnread

RE: Bxr-Linda: KrickleScraps Said: I like the Martha Stewart screw punch. It comes with 3 different sizes and very simple to use. I bought it on clearance at Wall-E-World..would not pay full price for it. I also have the big bite...and I like it too but use it mostly for eyelets! Hmmmmm... Except for the pretty handle, this is the same as the hollow punch set (which was less than $5 for 9 si...

I would have to say the Big Bite is perfect for so many reasons. My dh bought mine at M's with a 50% off coupon. I love it. So easy to use, measurements clearly marked, lots of reach etc.big
Sep '09 Bxr-Linda

RE: KrickleScraps: I like the Martha Stewart screw punch. It comes with 3 different sizes and very simple to use. I bought it on clearance at Wall-E-World..would not pay full price for it. I also have the big bite...and I like it too but use it mostly for eyelets!
KrickleScraps Said:
I like the Martha Stewart screw punch. It comes with 3 different sizes and very simple to use. I bought it on clearance at Wall-E-World..would not pay full price for it.

I also have the big bite...and I like it too but use it mostly for eyelets!

Hmmmmm...
Except for the pretty handle, this is the same as the hollow punch set (which was less than $5 for 9 sizes at Harbor Freight vs. $24.99 for the Martha Stewart 3-size one!)
Sep '09 Ms. Fit

RE: Fgongre: How do you punch a hole in the middle of your paper without folding it to put a flower or a button that has the brads. Is there a special tool to use?

My chosen technique is very simple and very cheap. I took the old ice pick from the kitchen junk drawer and added it to my scrap tools. When a hole is needed, I lay my paper, cardstock or whatever on a piece of scrap cardboard (just rip it from a shipping box that was headed for recycling anyway), make a light pencil mark and punch lightly with the ice pick. The shaft grows wider above the point, so if you want the hole a little larger, just slide the paper slowly up the shaft until the hole is the right size.
Sep '09 KrickleScraps

RE: SassyScrapper84: THIS is for sure one of my favorites!! Bxr-Linda Said: If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch. This is the Making Memories anywhere hole punch. Hollow punch set: If the hole doe...

I like the Martha Stewart screw punch. It comes with 3 different sizes and very simple to use. I bought it on clearance at Wall-E-World..would not pay full price for it.

I also have the big bite...and I like it too but use it mostly for eyelets!
Sep '09 SassyScrapper84

RE: Bxr-Linda: If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch. This is the Making Memories anywhere hole punch. Hollow punch set: If the hole doesn't have to be "pretty," use a craft knife (x-acto knife).
THIS is for sure one of my favorites!!

Bxr-Linda Said:
If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch.

This is the Making Memories anywhere hole punch.

Hollow punch set:

If the hole doesn't have to be "pretty," use a craft knife (x-acto knife).
Sep '09 Pghgirl777

RE: The Lady At Home: I usually use an x-acto. But as for paper piercers/eyelet setters, my friend gave me a great one from ProvoCraft. No hammers or springies or any thing. And I even used it to pierce cardstock the other day. She bought it on ebay for around $10. Silent Setter by ProvoCraft. Check it out.

I use my paper piercer.
Sep '09 Greenqueen

RE: Livelovecreate86: You could get a paper piercer.

I poke it with a thumbtack and have just folded the brad and put a glue dot and voila, no fuss or muss.
Sep '09 Livelovecreate86

RE: Mollydog: I vote for the big bite too.

You could get a paper piercer.
Sep '09 Mollydog

RE: SmartyPants: I use my Big Bite. Love it!

I vote for the big bite too.
Sep '09 SmartyPants

RE: Bxr-Linda: mommylove Said: Does anyone know were i can get a tooth punch i'm looking for it for 3 years now. And i can't give up thanks Sorry. I've never heard of a "tooth punch."

I use my Big Bite. Love it!
Aug '09 Bxr-Linda

RE: Amy Voorthuis: Does anyone know were i can get a tooth punch i'm looking for it for 3 years now. And i can't give up thanks
mommylove Said:
Does anyone know were i can get a tooth punch i'm looking for it for 3 years now. And i can't give up thanks

Sorry. I've never heard of a "tooth punch."
Aug '09 Amy Voorthuis

RE: The Lady At Home: I usually use an x-acto. But as for paper piercers/eyelet setters, my friend gave me a great one from ProvoCraft. No hammers or springies or any thing. And I even used it to pierce cardstock the other day. She bought it on ebay for around $10. Silent Setter by ProvoCraft. Check it out.

Does anyone know were i can get a tooth punch i'm looking for it for 3 years now. And i can't give up thanks
Aug '09 Mommy2Four

RE: The Lady At Home: I usually use an x-acto. But as for paper piercers/eyelet setters, my friend gave me a great one from ProvoCraft. No hammers or springies or any thing. And I even used it to pierce cardstock the other day. She bought it on ebay for around $10. Silent Setter by ProvoCraft. Check it out.

I use my paper piercer!
Aug '09 The Lady At Home

RE: Violet35: I use the end of a fork to punch a hole in the flowers or even thick paper.

I usually use an x-acto. But as for paper piercers/eyelet setters, my friend gave me a great one from ProvoCraft. No hammers or springies or any thing. And I even used it to pierce cardstock the other day. She bought it on ebay for around $10.

Silent Setter by ProvoCraft. Check it out.
Aug '09 Violet35

RE: DawnInAZ: I just use a paper piercer. My Crop O Dile is used very little anymore, mostly for cards or for chipboard or other hard to poke media.

I use the end of a fork to punch a hole in the flowers or even thick paper.
Aug '09 DawnInAZ

RE: Dotfree: The Croc-a-dile Big Bite reaches the middle of a 12X12 page.

I just use a paper piercer.
My Crop O Dile is used very little anymore, mostly for cards or for chipboard or other hard to poke media.
Aug '09 Dotfree

RE: Scraprabbit: Here Kitty Said: I just flatten the brad and stick the whole thing to my page with a glue dot Ditto! Sooo much easier!

The Croc-a-dile Big Bite reaches the middle of a 12X12 page.
Aug '09 Scraprabbit

RE: Here Kitty: I just flatten the brad and stick the whole thing to my page with a glue dot
Here Kitty Said:
I just flatten the brad and stick the whole thing to my page with a glue dot

Ditto! Sooo much easier!
Aug '09 Rockmom

RE: Bxr-Linda: IzzyB Said: I have a cropadile big bite, which I love solely for that purpose. You can use a coupon and get them 40-50 percent off. (no offense to you) I think this is so funny how many people ONLY use their cropadiles as hole punches. I guess if you want to have a $45 hole punch! I am just too cheap.

I use my paper piercer - it looks like a ice pick.
Aug '09 Bxr-Linda

RE: IzzyB: I have a cropadile big bite, which I love solely for that purpose. You can use a coupon and get them 40-50 percent off. Barring that, I have found that the sharp end of a cheapo seam ripper (for sewing) works just fine. The sharp end is rounded (like a paper piercer) so it doesn't make a hole too large (which might happen using the end of scissors) and doesn't require buying a specific tool (p...
IzzyB Said:
I have a cropadile big bite, which I love solely for that purpose. You can use a coupon and get them 40-50 percent off.

(no offense to you)
I think this is so funny how many people ONLY use their cropadiles as hole punches. I guess if you want to have a $45 hole punch!

I am just too cheap.
Aug '09 IzzyB

RE: Bxr-Linda: obsidian Said: Bxr-Linda Said: If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch. This is the Making Memories anywhere hole punch. If the hole doesn't have to be "pretty," use a craft knife (x-acto kni...

I have a cropadile big bite, which I love solely for that purpose. You can use a coupon and get them 40-50 percent off.

Barring that, I have found that the sharp end of a cheapo seam ripper (for sewing) works just fine. The sharp end is rounded (like a paper piercer) so it doesn't make a hole too large (which might happen using the end of scissors) and doesn't require buying a specific tool (paper piercer or big bite).
Aug '09 Bxr-Linda

RE: Obi: Bxr-Linda Said: If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch. This is the Making Memories anywhere hole punch. Hollow punch set: If the hole doesn't have to be "pretty," use a craft knif...
obsidian Said:

Bxr-Linda Said:
If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch.

This is the Making Memories anywhere hole punch.

If the hole doesn't have to be "pretty," use a craft knife (x-acto knife).

Last time I saw my craft hole punches they were in my loves tool kit. Don't you just love men?

Funny!
That's why I buy cheap stuff from Harbor Freight. It works great for crafts and paper, but not sturdy enough for much else. Hubby wouldn't WANT them!
Aug '09 CASBa

RE: Llprncess3: I usually use my paper piercer to make a hole. If not I use my scraparatus to punch a hole. I love that you can punch and set eyelets anywhere with it.

I use a thumb tack to pock a hole in the paper.
Aug '09 Llprncess3

RE: *jesse*: I use the very pointy tip of my Cutter Bee scissors... it creases the page just a tiny bit, but it creates just enough of a hole that the brad will stay nice & tight.

I usually use my paper piercer to make a hole. If not I use my scraparatus to punch a hole. I love that you can punch and set eyelets anywhere with it.
Aug '09 *jesse*

RE: Obi: Bxr-Linda Said: If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch. This is the Making Memories anywhere hole punch. Hollow punch set: If the hole doesn't have to be "pretty," use a craft knif...

I use the very pointy tip of my Cutter Bee scissors... it creases the page just a tiny bit, but it creates just enough of a hole that the brad will stay nice & tight.
Aug '09 Obi

RE: Bxr-Linda: If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch. This is the Making Memories anywhere hole punch. Hollow punch set: If the hole doesn't have to be "pretty," use a craft knife (x-acto knife).
Bxr-Linda Said:
If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch.

This is the Making Memories anywhere hole punch.

Hollow punch set:

If the hole doesn't have to be "pretty," use a craft knife (x-acto knife).

Last time I saw my craft hole punches they were in my loves tool kit. Don't you just love men?
Aug '09 Sweet1

RE: Here Kitty: I just flatten the brad and stick the whole thing to my page with a glue dot

I use a paper piercer or my crop-a-dile big bite.
Aug '09 Here Kitty

RE: Ndluvergirl: I use the anywhere punch listed above, it works great!

I just flatten the brad and stick the whole thing to my page with a glue dot
Aug '09 Ndluvergirl

RE: Bxr-Linda: If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch. This is the Making Memories anywhere hole punch. Hollow punch set: If the hole doesn't have to be "pretty," use a craft knife (x-acto knife).

I use the anywhere punch listed above, it works great!
Aug '09 Bxr-Linda

RE: Mom2HL: Okay, I am sure some may find this weird but it works great for me (I try to limit my tools). I use a carpet nail (very sharp!) I place a piece of cardboard (thick) on top of my cutting mat then the paper on the cardboard. Place the nail tip where I want my hole and give it a wack!Makes a great small hole. I have not used this for fabric though, I imagine it would tear the fabric. Good luck!

If the hole has to be nice and round, use a hole punch. I have a Making Memories anywhere hole punch (I can't find them here at the superstore). There are similar tools at hardware stores. I have both shown below. I LOVE the MM hole punch.

This is the Making Memories anywhere hole punch.

Hollow punch set:

If the hole doesn't have to be "pretty," use a craft knife (x-acto knife).
Aug '09 Mom2HL

RE: Fgongre: How do you punch a hole in the middle of your paper without folding it to put a flower or a button that has the brads. Is there a special tool to use?

Okay, I am sure some may find this weird but it works great for me (I try to limit my tools). I use a carpet nail (very sharp!) I place a piece of cardboard (thick) on top of my cutting mat then the paper on the cardboard. Place the nail tip where I want my hole and give it a wack!Makes a great small hole. I have not used this for fabric though, I imagine it would tear the fabric.

Good luck!
Aug '09 Obi

RE: Fgongre: How do you punch a hole in the middle of your paper without folding it to put a flower or a button that has the brads. Is there a special tool to use?

There are several options a very long handled hole punch. This will give best results.

The next option is trickier. Use a Sharpe tool on a cutting pad and cut a small x then push the brad through the cut. If it needs to be rounder a knitting needle can round it out. Always remember to push from the face side and be very gentle paper can tear very easily using this technique but it's very good for card stock.

To stop creasing and reduce the risk of tearing a bit of florists foam or modeling clay underneath the paper helps. Because the needle will go onto the clay but the paper will stay put.
Aug '09 Fgongre

How do you punch a hole in the middle of your paper without folding it to put a flower or a button that has the brads. Is there a special tool to use?