question about embossing

Sep '09 ScrapHappyStArLIGhT

RE: PokeyMom: Use pigment ink or VersaMark pad with your EP (embossing powder). Use quality card stock as that will stand up to the heat and not warp. Don't hold the gun too close (scorching unless you are going for the South Western look!) or too long (you can burn off the EP). Once you see it melt and shine, that should be enough applied heat.

Here Kitty (Amy) gave a fabulous answer! The main keys are to keep the heating gun a good distance from the paper and keep it moving! It may seem like it's taking a little while but just take your time.

I've never done it from the back...I may have to try that!
Sep '09 PokeyMom

RE: Therese31: I just got my embossing heat gun the other day, and I tried to used it last night. I was just curious since this is my first time using this stuff. Is it normal that the paper will shrink? it waves. I tried to inserted it in a book over night and still the paper shrunk and has a wave look I threw away the card coz I really don't like the look...=(. Do you experience this? what you did of your...

Use pigment ink or VersaMark pad with your EP (embossing powder).

Use quality card stock as that will stand up to the heat and not warp.

Don't hold the gun too close (scorching unless you are going for the South Western look!) or too long (you can burn off the EP). Once you see it melt and shine, that should be enough applied heat.
Jul '09 LacyKb

RE: Seaexplore: You can also heat it from underneath. Be careful you don't scorch your fingers tho! been there, done that! It sounds like you had the heat gun a bit too close to the paper. I move mine around the whole time rather than just keeping it in one spot to melt that part and then moving along.

I liked Here Kitty's reply, let the gun heat up before using it, keep it about 6 inches away from the paper, and keep moving the gun around. When I'm done, while the paper is still hot, and has a wave I flatten it with dry washcloth (so I dont burn my hand)
Jul '09 Seaexplore

RE: Here Kitty: Warm up the gun by turning it on for about 15-20 seconds before you use it. Make sure there is nothing in the way of the gun that will burn or warp. Once the gun is heated, bring it about 4-5 inches away from the object youâ€™re embossing and move it back and forth. You donâ€™t want to burn or warp it, so keep it moving. When the powder melts, youâ€™ll notice a different lo...

You can also heat it from underneath. Be careful you don't scorch your fingers tho! been there, done that!

It sounds like you had the heat gun a bit too close to the paper.

I move mine around the whole time rather than just keeping it in one spot to melt that part and then moving along.
Jul '09 Here Kitty

RE: Bluucaca: i just started to emboss also and i'm having the same trouble and how do you get the raised shiny look

Warm up the gun by turning it on for about 15-20 seconds before you use it. Make sure there is nothing in the way of the gun that will burn or warp.

Once the gun is heated, bring it about 4-5 inches away from the object youâ€™re embossing and move it back and forth. You donâ€™t want to burn or warp it, so keep it moving.

When the powder melts, youâ€™ll notice a different look to it. Each type of powder looks differently when it melts, but youâ€™ll definitly notice a difference (raised and shiny/matte/sparkly/etc).

Once a section is melted, move onto the next, you donâ€™t need to keep heating the melted portions.
Jul '09 Bluucaca

RE: Pjangel: Sounds like you had the heat gun to close to the card. Sometimes if you are to close it willturn the paper brown. Just play around with the heat gun..

i just started to emboss also and i'm having the same trouble and how do you get the raised shiny look
Jul '09 Pjangel

RE: Therese31: I just got my embossing heat gun the other day, and I tried to used it last night. I was just curious since this is my first time using this stuff. Is it normal that the paper will shrink? it waves. I tried to inserted it in a book over night and still the paper shrunk and has a wave look I threw away the card coz I really don't like the look...=(. Do you experience this? what you did of your...

Sounds like you had the heat gun to close to the card. Sometimes if you are to close it willturn the paper brown. Just play around with the heat gun..
Jul '09 Therese31

I just got my embossing heat gun the other day, and I tried to used it last night. I was just curious since this is my first time using this stuff. Is it normal that the paper will shrink? it waves. I tried to inserted it in a book over night and still the paper shrunk and has a wave look I threw away the card coz I really don't like the look...=(. Do you experience this? what you did of yours? I will appreciate any advice. Thanks!