Take an Extra 7% OFF With Code: CREATE
$36.99
$111.00 $104.99
$32.99
$66.00 $62.99
$19.99
Contents:
Size: 17.2” x 11.5” x 9.25”
Weight: 7 1/2 lbs.
Get ready to start creating banners, cards, layouts, tags, party décor, DIY projects and more with the one-of-a-kind Evolution Advanced Die Cutting Tool! This unique machine can not only cut and emboss materials, but it can also be used for your letterpress projects.
You are going to love that this machine is lightweight, has an easy fold-up design, features extra storage space and is perfect for your on-the-go crafting.
Here’s what makes the Evolution Advanced Die Cutting Tool unique:
Only machine that allows you to use a motor or a hand crank system (motor sold separately: wr-03791-0)
Features sliding lock mechanism instead of having to use an Allen wrench for handle
Built-in storage (perfect for your dies, materials and tools)
Dial setting feature (eliminates swapping plates and shims and remember complicated sandwiches)
Height adjustment gear system (eliminates confusing mat combinations)
The Evolution Advanced Die Cutting Tool is compatible with most leading dies and embossing folders and it will cut and emboss materials up to 6” wide. Its dial setting adjusts the height of the rollers and sets the pressure, eliminating confusing mat combinations and shims. Die cutting doesn't have to be complicated!
How to use the We R Evolution Advanced for die cutting:
How to use the We R Evolution Advanced for embossing:
How to use the We R Evolution Advanced for letterpressing:
How to care for machine:
Use cleaning cloths to clean up when you’re are finished creating.
How to store:
Remove handle by pressing the button to the unlock position and store in the side compartment
Store your dies, materials and tools in the side compartments
Fold up the machine to release suction cups from your work surface
Tip:
The settings were tested using standard weight 80lb cardstock, use caution if using other weight paper to ensure you get clean cuts and do not damage the tool.
What our customers are saying about the We R Makers - Evolution Advanced Die Cutting Tool
“Emboss, die cut AND letterpress in ONE machine with one sandwich. All you have to change is the setting on a dial! No more layers of different pads to cut depending on thickness of dies either--just adjust the dial!” – rebeccakeppel
“I LOVE THIS DIE CUTTING MACHINE!!!! It's very sturdy, portable and very functional! Got this for Christmas last year! I know everyone is wondering how to use the dial since there is not enough information on how to use it with certain dies/embossing folders. I did some research & found the Evolution Advance Dial Settings (pdf) on this website: http://www.weronthenet.com/Evolution_Advanced. I printed out the Evolution Advance Dial Settings pdf as a 4x6, trimmed it, and laminated it as a reference guide and stuck it in 1 of the compartments. I hope the link above helps!” – gailyBunny
“I just got it and have only used it a little, but l love it. So far, everything is working great. The Evolution holds to the surface very well. The crank is easy to turn and I like that I don't have to remember what tabs, shims to use. Adjust the knob, and your on your way. GREAT MACHINE!!!!” – Claudia Giannini
“Easy to use. Less material to carry (shims, extra plates) can do all of your cutting, embossing etc. on one tool. I like it.” – carolapherigo
“I really love this machine, you can use the handle or motor, it cuts very well and has storage on both sides. It also has suction when you pull down the trays. Great product.” – cwenker
“Bought one last December as my Cuttlebug finally died. Love this machine as I just have to turn dial for different thicknesses. Clings to table and gives excellent die cuts. Extremely happy with this machine and would recommend it to anyone.” – barbie06
NOTE: You can compare the Evolution Advanced with other top-selling machines using our handy Die Cut Machine Comparison Chart.
I love my Evolution. It's such a pleasure to not have to deal with sandwiches and shims. However, I bought it with the electric attachment due to extreme weakness from a medical problem and I find I can't turn the dial to change the settings. My husband rigged up a vice grip to the dial so I could turn it. I have never been able to open the storage compartments. Hope there is nothing important in there. Otherwise it's a gem.
I love this little machine but the only problem I have is that the B Mat that came with it is now warped and I am unable to get perfect die cuts as I did when it was new. I only purchased it last November and I use it a lot for both cutting and embossing but I'm not happy with the warp on the Genius Mat B.
Can it be replaced or a separate Mat B purchased separately? Thank you.
Pros:
1. I know that my Evolution Advanced can cut any thin die cut. I can buy thin die cuts to my hearts content. This is a huge pro in my book.
2. It's lightweight, compact, and easy to turn the handle. I know I can purchase the motor separately should I ever need it.
3. The handle and directions can be stored in the machine.
Cons:
1. I traded confusing sandwiches for confusing dial settings. The dial settings found on the WRMK website are neither intuitive nor accurate (it probably depends on the paper), so experimenting and paper-wasting are necessary.
2. I cannot use my large Sizzix steel roll dies in this, even though there is a corresponding dial setting for these dies. I tried, but the machine sounded like it was breaking. It took me 3 attempts to get a die through, and I will not be doing it again.
3. To use the smaller Sizzix steel roll dies, I had to purchase an "A" mat, which is sold with a "B" mat. So.....I now own the base, a magnetic base (it's easier to use), two B mats, 1 A mat, and a flexible mat that I am still not certain what to do with. So, I'm not sure why WRMK promotes this product with the, "No more confusing sandwiches" tag line. I have a lot of makings for sandwiches, and I'm confused.
Suggestions:
Scrapbook.com offers a free Evolution Advanced class. This is a must, in my book. Directions that come with the EA are very simplistic. Dial settings are not included with the directions, but are downloadable with the class (directions are on the WRMK website, too, but hard to find).
I gave this product a 3-star rating because the pros are good pros.
Used in this project: Congratulations
Emboss, die cut AND letterpress in ONE machine with one sandwich. All you have to change is the setting on a dial! No more layers of different pads to cut depending on thickness of dies either--just adjust the dial!
Used in this project: Set them Free
Not thrilled with the lack of directions for this and have yet to get it to work properly. Disappointed. Hope that I will find a tutorial that will actually show me how to use the dial properly for cutting.
Used in this project: Pett Family
This machine is SO much easier to use than any of the others (they shall remain nameless). I really love this machine & find myself using it much more than I did the two others that I have.
I love my new machine I had right shoulder surgery it as been difficult cranking my other machine. Two of my stamping friends have ordered on my recommendations. Again I loveit. It is easy to use!!!!!
This review was written about a related product.
Am very happy so far with this machine and the service I received from Scrapbook.com... have ordered from you before and will continue to do so
This review was written about a related product.
I really love this machine, you can use the handle or motor, it cuts very well and has storage on both sides. It also has suction when you pull down the trays. Great product.
This review was written about a related product.
I LOVE THIS DIE CUTTING MACHINE!!!! It's very sturdy, portable and very functional! Got this for Christmas last year!
I know everyone is wondering how to use the dial since there is not enough information on how to use it with certain dies/embossing folders. I did some research & found the Evolution Advance Dial Settings (pdf) on this website: http://www.weronthenet.com/Evolution_Advanced. I printed out the Evolution Advance Dial Settings pdf as a 4x6, trimmed it, and laminated it as a reference guide and stuck it in 1 of the compartments. I hope the link above helps!
You must be signed in to comment. Please click here to sign in.