Thank YOU! It's Customer Appreciation Week!
Take an Extra 12% OFF With Code: THANKYOU
Take an Extra 12% OFF With Code: THANKYOU
$16.99
$24.00 $22.49
$300.00 $254.99
$33.99
Contents: 4 pads (2 pair)
Size: 8 3/4" x 6 1/8" x 1/8"
Cutting Pads Details: Cut thousands of steel rule and thin metal Sizzix dies in your Sizzix machine using this versatile set of polycarbonate plastic Sizzix Cutting Pads. These clear cutting pads, also known as cutting mats, make it easy to see that your paper and die remain properly aligned while loading in the machine and cutting. Pair these clear cutting pads with the Sizzix Standard Magnetic Platform to get perfect cuts every time from your chemically etched wafer thin metal dies from Sizzix and dozens of other brands. And weighing in at at only a quarter of a pound, these pads are lightweight to take on the road with your machine for a crop.
Plus, you can get double use from these Sizzix pads - when one side of these cutting pads is worn out, flip them over to get more cutting life from them in your BIGkick, Big Shot, or Vagabond machine. When both sides are worn out, then it’s time for replacement cutting pads.
This item is for use with the all models of the Sizzix Big Shot, all Vagabond machines and the Sizzix BIGkick. Each of the Sizzix Standard Cutting Pads are made of the highest quality polycarbonate plastic and each pad is approximately 8 3/4" x 6 1/8" x 1/8".
The cutting pads for the Sizzix Big Shot are a necessary part of equipment to use the machine. The time between replacements really varies. It depends on how much die cutting I do. They usually last between 3 and 6 months, rarely they last a year. It is important to keep turning them, using both sides as they last a lot longer that way.
This review was written about a related product.
Sizzix cutting pads do the intended job. I like the new beveled edge that eases the pads under the rollers. On the other hand, these new pads seem to bend easier than the original pads. Is Sizzix using a different material? In any case, keep flipping the pads and moving dies around...the result will be less warping. I like the size of these pads better than the extended cutting pads..easier to move around.
This review was written about a related product.
I think I like die cutting more than anything so far. Only experimenting with different items but I have basically shredded the plates I originally purchased. I ruined a die because I wasn't paying attention to how used it was...I'm a novice. Still I'm glad I purchased and paying attention. They Work Great! :)
Long lasting and sturdy I have bought this product before from scrapbook.com. They offer a sturdy and long lasting product and I seldom have to replace one or both pieces. I do a lot of stamping and have found that they also offer good prices especially with sales. I will continue having several sets on hand all of the time.
This review was written about a related product.
Thats what I am. Why do they make a product that gets messed up just for doing what these do? Why can't they make a method or material that doesn't get all messed up just for using their die cuts? Am I wrong here? There has to be a better way.
This review was written about a related product.
This precision engineered acrylic plate is the exact thickness to go thru the Sizzix Big Shot machine. There is a top and a bottom one and the die and the paper are wafered in between. Perfect diminsions everytime.
This review was written about a related product.
everything about this transaction was perfect. The price was excellent, very fast shipping and product arrived in perfect condition. I have purchased from scrapbook.com before and I will continue to use them. I am in the process of making my Christmas cards and have almost worn the pads out already
This review was written about a related product.
They do what they are supposed to do. I wanted to have a backup set just in case. They arrived on time and as always the packing was great, price was right and I love shopping at scrapbook.com. :)
This review was written about a related product.
My plates are getting pretty well etched up, which is starting to show through on some of my cardstock. Went ahead and purchased a new set of plates and was surprised at how inexpensive they were! Glad to have some fresh new ones!
This review was written about a related product.
These cutting plates work great! I'm set now as I ordered this set of 2 plates and accidentally ordered 1 set,so now I have 3 sets! Sometimes I wish the people putting your order together and find you adding more of 1 of the same thing would question you as to do you really want 3 sets? Maybe that would bother some people, but I really wouldn't mind because I really don't need 3 sets of plates for Die cutting. Suppose I could send them back, but I don't want to pay for the shipping. My fault, but just saying! 🙄
I will double check My orders closely from now on!
You must be signed in to comment. Please click here to sign in.
I am using the Vagabond to emboss cards. After almost 50 cards, the machine stopped embossing the entire card.
If you have warping this could very well be why embossing or die cutting would be uneven. There is not a specific time frame in which plates will have to be replaced. Basically, when you start running into issues is when you should replace them. Dies will cut into the plates but if you are having actual cracks, it sounds like it would be time to replace them. Hope this helps!
By: Scrapbook.com
(31-Oct-19)
Do all the pads become etched with the dies you use or am I using them wrong?
By:
txgrl57
(25-Sep-19)
I was tired of this gaping to my plates so i started using dryer sheets on the layer to prevent the etching
This is absolutely normal! The plates are meant to be replaced eventually. In the product description above we tell you how to extend the life of your plates as well. Hope this helps!
By: Scrapbook.com
(25-Sep-19)
Do these pads work on the cuttle bug? I am having trouble cutting the thinlets.
By:
notthmom
(12-Jul-18)
These pads are not made for the Cuttlebug so you shouldn't use them. When cutting thinlits on a Cuttlebug, however, I found that it would help them cut if I added a shim to my sandwich. This could be a folded piece of cardstock or a piece of chipboard. You just need something to give the thinlits a little lift to meet the rollers of the machine. I hope this helps!
By: Joanie R
(12-Jul-18)
I wanna ask about the dimensions is it the same like the original pads that come with bigshot or its smaller
By:
Mahagebril
(11-Oct-14)
Hi,
Since Cuttlebug discontinued so did its cutting plates, and I need replacements but can't find them anymore. Will these work for Cuttlebug as well? I know someone asked the same question but the answer said they shouldn't be used for Cuttlebug but didn't say whether they "would" work for Cuttlebug... Please help? Thanks so much! :)
By:
User
(17-Mar-20)
I found this answer very helpful from another customer.
I needed the Cuttlebug C plate which by the way I didn’t realize I needed it. Found it along with a Shim on Amazon as I am not comfortable buying off of EBay
By: spend2much
(30-Mar-25)
Help Needed: I was wondering if these plates would work with my evolution advanced by we r memory keepers, and if yes do I use them with the evolution platform or will I need the sizzix platform???
By:
meeks8405
(30-May-19)
These Sizzix Big Shot Plates are not meant to be used in the Evolution Advanced machine and doing so will likely void your warranty. Hope this helps!
By: Scrapbook.com
(30-May-19)
Could anyone out there tell me do these cutting p,ages have beveled edges? I have the big shot switch plus and I don�t think the straight edge will work on the machine. I have tried one before and the machine would not take the sandwich. Thsnks in advance for your help
By:
Bkingy
(05-Apr-25)
Which cutting plates are compatible with a Gemini 9� x 12.5�?
By:
User
(27-Aug-24)
Hello! These pads were designed to be used with Sizzix. Using these cutting pads on any other machine is not recommended as they could void your warranty.
By: Scrapbook.com
(27-Aug-24)
