DISAPPOINTED!!!!!
Couldn't wait to get this die. I do Halloween parties every year, and I needed 13 of these for Place Settings. The die comes as one piece, NOT 13 pieces. One of the bones is connected INSIDE the skelly body, so if one cuts the entire die, the skelly body has a hole down the center and can NOT be used. I tried to break out the badly placed bone, and almost bent the die. I filed it out, and did bend the die. I then found that, instead of two upper leg bones, two lower leg bones (connected to the foot), two upper arm bones, and two lower arm bones (connected to the hand), there is ONE all purpose bone to be used for above listed four upper arm/leg pieces, plus there is ONE lower arm, and ONE lower leg. I have to run this die through twice to get all the lower arms and legs, and four times to get all my upper arm/leg pieces. So, I purchased a $50.00 Dremel tool to cut apart my die pieces and not bend anything any further. Plus, I had figured my paper requirements (expensive, embossed, textured, bone colored, heavy card stock) based on the die size, and I find I am using TWICE the card stock projected. LOVE the die. HATE the packaging. I would give up the cute hat and bow tie for enough die pieces to run the die through my cutter ONCE for each skeleton wiggle.