Stamping Sale!
Take an Extra 7% OFF With Code: CREATE
Take an Extra 7% OFF With Code: CREATE
$6.49
$8.49
$17.49
$25.94
$12.99
Introducing the Precision Glue Press is from My Sweet Petunia. This tool is perfect for anyone who has trouble squeezing glue bottles with their hands. Some might refer to this as a glue gun, however the glue bottle and the press are separate. Once you have set up the Precision Glue Press, you can recycle the box and the rubber band can be reused, making the packaging fully recyclable. Take some of the work out of gluing with the Precision Glue Press!
Includes six items:
Instructions:
WARNING: Adult craft item. Keep out of reach of small children.
This glue gun is a game changer for anyone with arthritis in their hands. I have been struggling with pain every time I've had to apply adhesive with regular glue bottles, and this has remedied that situation. It also prevents the clogging you experience with regular bottles. I'll be getting a second one so I am able to have one glue gun with a fine tip and one with the wider tip. This is one fantastic tool.
This tool has allowed me to continue crafting. I was ready to give it up for good due to the pressure it took to squeeze glue bottles. And this has helped my hands so much. Thank you Illiana from My Sweet Petunia. Even if you don't have problems with your hands I would highly recommend this tool.
This is just like a hot glue gun BUT:
The glue is at room temperature
You can use any brand of glue or NUVO drops
No plugs or wires
Great for people who want an even amount of glue from one end of the project to the other end
Fine tip precision AND thick tip available in the same gun that can easily be switched back and forth
Awesome!
With the glue that comes with the Precision Glue Press it is a lot easier to distribute the amount of glue you need and place it precisely where it needs to be. As with a thicker/denser glue there is noticeable difference in the amount of effort needed to distribute the glue BUT still easier than just trying to squeeze the bottle of pretty much any glue. I wholeheartedly recommend the Precision Glue Press, although a bit pricey up front but if you can swing the price worth it in the long run…
I'm an 81 year old card maker and this product is the best addition to my card making supplies in years. I never have to search for a pin to close or unstop my glue bottle, in fact I never have to look for a tiny little bottle of glue on my cluttered workspace. I'm losing strength in my hands and wrist and the Precision Glue Press enables me to glue small to large items with precise neatness and ease.
I don't even know where to begin. Every little detail has been thought of. Wasn't expecting the cap holder, the silicone pad to keep the nozzle sealed between squeezes and the needle in the glue caps to keep the nozzle clear. Better stock up, I'm telling everyone about the awesomeness of this glue press. If you make a battery operated version I'm in!
I obviously waited a long time to buy this after it first appeared. I happened to catch Simon Hurley's YouTube review of the product and he answered a lot of my questions about it. I was concerned about how useful it would be for me. I have small hands and arthritis is becoming more of a problem. I wasn't sure if the "trigger" mechanism would be too hard to squeeze and would the span from trigger to handle be too wide. Those were two of the points Simon covered in his video by demonstrating how to hold and use it. He also pointed out a couple of things that aren't so obvious, the first being that the silicone spot that the tip of the glue press sits on while in the base acts as a seal to stop the flow of glue. He also explained that he's left his glue press resting on the base for several months without using it and when he went back to it the glue flowed freely, it had not dried/clogged the tip. The instructions tell you to remove the bottle of glue and replace the cap on the bottle to keep the glue from drying in the bottle. When he explained what he did that was a huge selling point for me — I don't want to have to take the bottle out and recap it everytime I finish a crafting session.
I've only been using the Glue Press for a short time (broke my left arm so haven't been able to do much crafting) but it's definitely a smart buy for me.
My actual favorite reason for buying this was the stand that keeps it from drying out while you are doing several cards and the lid with the built in pin that keeps the opening clear. The bonus is the ease in which it dispenses the glue so evenly. I have to admit that putting that lid on is a tiny bit difficult because the area I work in isn't brightly lit and I'm old and my eyesight isn't what it used to be. That being said, it isn't too bad and I love that I don't have to figure out where that stainless steel pin went to keep my glue from drying out. This is definitely worth the money to me. I would repurchase if an elephant stepped on it and crushed it. (haha!) I love it!
I have seen good reviews on this (people with hand issues) so I really needed it. I want to like it, but I could barely get any glue out of the thin nozzle and I had to press really hard to get what little I got (the bottle was all the way in and I also used a pin the make sure there was nothing in there). When I went back to use it a couple of days later (I am using the glue with the bigger nozzle) the glue wouldn't come out and there was no glue on the rubber part you put the press into (saw a video that says if there was glue on the rubber part it just pops right off). I'm not sure if I got a bad batch, but I will keep trying to use it and see if it gets any better. I'm giving it a NO for now but hopefully I will feel differently with more use.
You must be signed in to comment. Please click here to sign in.
Does your Smart Glue bottle fit inside glue press or does the glue have to be switched to the spare bottle that it comes with? Also will you eventually sell spare bottles? I don't want to deal with another site.
By:
Sootsie
(29-Feb-24)
Hello, our smart glue bottle will not fit the Precision Glue Press and is too small, however, the glue can be transferred to the empty bottle provided in the box. We are reaching out to our team to see if we will be selling extra bottles, we will let you know as soon as they follow up with us regarding this.
By: Scrapbook.com
(01-Mar-24)
Hello, we are happy to follow up and advise that we will soon be carrying the spare empty bottles that can be found here link
By: Scrapbook.com
(21-Mar-24)
Any idea when/if this will be in stock again?
Hello,
Does the press hold only 2 oz bottles or will it also hold the 4 oz size?
By:
juliebscrappin
(27-Aug-24)
Has anyone tried to use Beacon 3 in one glue with the larger tip?
By:
HSnell
(14-Jun-24)
Hello, we have not tested the Beacon 3 in 1 glue with this device. The manufacture advises that the empty bottle provided can be used with alternative adhesive but that it is not to be used with solvent adhesives.
By: Scrapbook.com
(15-Jun-24)
Will this be reordered?
By:
pokie123
(14-May-24)
Hello and thanks for asking. Yes. Any time you see the Notify Me tab we will have the product reordered.
By: Scrapbook.com
(15-May-24)
I have really small hands as well as rheumatoid arthritis. Is the reach for the lever very far? And how strong of a pull is it?
By:
joannrdh
(18-Feb-24)
Hello,
Does the bearly art glue work in the glue press bottle.
Hello! Yes, you can fill the empty bottle with your favorite adhesive, including the Bearly Art - Precision Craft Glue.
By: Scrapbook.com
(05-Feb-24)
How much room does this take up on your desk?
By:
User
(21-Jan-24)
I have this on order but not received yet..however Simon Hurley did a review of this on utube and some of your questions might be answered there..I found it very informative with tips and tricks.
By: lavernwayne
(22-Jan-24)
Hello,
